# Lighting Equipment
This is the equipment we have for lighting the dance floor.
It is all DMX controlled.
## DMX Controllers
- ADJ DJ WMX1 Controller - a powerful, compact standalone DMX controller that is used to control lights in the dance area
- Our [DMX Setup](https://wiki.futureturtles.com/books/burning-man-infrastructure/page/dmx-lighting-setup-2025 "DMX Setup 2025") page has setup details.
- [Manufacturer's home page](https://www.adj.com/wmx1)
- Visit [wolfmix.com/activate](https://wolfmix.com/activate) for activation and help getting started
- [ADJ Airstream Bridge](https://www.adj.com/airstream-dmx-bridge) (plus iPad to control it) - An older device that works reasonably well as a simple, backup DMX controller
## DMX controlled lights
- 6 (six) [ADJ 7P HEX IP](https://www.adj.com/7p-hex-ip) with 3pin DMX plugs and Neutrik True1 for power - daisy chainable
- 10 (ten) [ADJ 7P HEX IP](https://www.adj.com/7p-hex-ip) with 5pin DMX plugs and Neutrik True1 for power- daisy chainable
- 4 (four) [ADJ Saber Spot RGBW LED Pinspot](https://www.adj.com/saber-spot-rgbw) with 3pin DMX plugs and Neutrik PowerCon for power - daisy chainable
- 8 (eight) [DJXFLI 120W Moving Head DJ Lights](https://www.amazon.com/Moving-Activated-Control-Wedding-Lighting/dp/B0C9LZXY8K?ref_=ast_sto_dp&th=1) (cheap amazon random stuff) with 3pin DMX and Neutrik PowerCon for power - not daisy chainable
## Power cables
Note there are two kinds. Neutrik PowerCon is the old kind("blue and grey"), shown here on the left -- it is not designed to be unplugged under load. Neutrik True1 is the new kind which can be unplugged under load and is therefore safer.
[](https://wiki.futureturtles.com/uploads/images/gallery/2025-06/nM3StwtdOKxFhSF9-screenshot-2025-06-11-at-4-04-57-am.png)[](https://wiki.futureturtles.com/uploads/images/gallery/2025-06/1M0JSWwbmEiMjMgx-screenshot-2025-06-11-at-4-05-23-am.png)
#### Inventory
Description
| Length
| Inventory 2024 | New for 2025 |
Nema 5-15P to True1 (plugs PAR lights into normal outlet) | 6' | 16 | 0 |
True1 Daisy Chain (plug one PAR light into neighbor) | 10' | 0 | 5 |
True1 Daisy Chain (plug one PAR light into neighbor) | 15' | 7 | 0 |
True1 Daisy Chain (plug one PAR light into neighbor) | 25' | 6 | 0 |
Nema 5-15P to PowerCon (plug spots and moving heads into power) | 6' (?) | 12 (?) | 0 |
PowerCon Daisy Chain (plug one spot into neighbor) | 6' | 0 | 2 |
Nema 5-15R to PowerCon (plug DMX TX and RX into PinSpot)
| 1' | 0 | 2 |
## DMX cables
DMX cables come in 5-pin and 3-pin variations. Note that ten of our PAR lights use 5-pin and everything else is 3-pin.
**Did you know -** DMX cables, used for lighting control, look the same as XLR cables, used for speakers, but they have a different impedance, so don't mix them up.
The last "output" in a chain of DMX cables must have a terminator on it.
Description
| Length
| Inventory 2024 | New for 2025 |
3-pin DMX | 6.5' | 0 | 13 |
3-pin DMX | 10' | 8 |
|
3-pin DMX | 15' | 3 |
|
3-pin DMX | 25' | 15 |
|
3-pin DMX Terminator |
| 0 | 2 |
5-pin DMX | 6.5' | 0 | 7 |
5-pin DMX | 15' | 8 |
|
5-pin DMX | 25' | 9 |
|
5-pin DMX | 50' | 4 |
|
5-pin DMX Terminator |
| 0 | 2 |
3-pin F to 5-pin M adapter |
| 6 |
|
3-pin M to 5-pin F adapter |
| 6 |
|