Lighting Equipment

This is the equipment we have for lighting the dance floor. 
 It is all DMX controlled. 
 DMX Controllers 
 
 ADJ DJ WMX1 Controller - a powerful, compact standalone DMX controller that is used to control lights in the dance area
 
 Our DMX Setup page has setup details. 
 Manufacturer's home page 
 Visit wolfmix.com/activate for activation and help getting started 
 
 
 ADJ Airstream Bridge (plus iPad to control it) - An older device that works reasonably well as a simple, backup DMX controller 
 
 DMX controlled lights 
 
 6 (six) ADJ 7P HEX IP with 3pin DMX plugs and Neutrik True1 for power - daisy chainable 
 10 (ten)  ADJ 7P HEX IP with 5pin DMX plugs and Neutrik True1 for power- daisy chainable 
 4 (four) ADJ Saber Spot RGBW LED Pinspot   with 3pin DMX plugs and Neutrik PowerCon for power - daisy chainable 
 8 (eight) DJXFLI 120W Moving Head DJ Lights (cheap amazon random stuff) with 3pin DMX and Neutrik PowerCon for power - not daisy chainable 
 
 Power cables 
 Note there are two kinds. Neutrik PowerCon is the old kind("blue and grey"), shown here on the left -- it is not designed to be unplugged under load. Neutrik True1 is the new kind which can be unplugged under load and is therefore safer. 
 
 Inventory 
 
 
 
 
 Description 
 
 
 Length 
 
 Inventory 2024 
 New for 2025 
 
 
 
 
 Nema 5-15P to True1 (plugs PAR lights into normal outlet) 
 6' 
 16 
 0 
 
 
 True1 Daisy Chain (plug one PAR light into neighbor) 
 10' 
 0 
 5 
 
 
 True1 Daisy Chain (plug one PAR light into neighbor) 
 15' 
 7 
 0 
 
 
 True1 Daisy Chain (plug one PAR light into neighbor) 
 25' 
 6 
 0 
 
 
 Nema 5-15P to PowerCon (plug spots and moving heads into power) 
 6' (?) 
 12 (?) 
 0 
 
 
 PowerCon Daisy Chain (plug one spot into neighbor) 
 6' 
 0 
 2 
 
 
 
 Nema 5-15R to PowerCon (plug DMX TX and RX into PinSpot) 
 
 1' 
 0 
 2 
 
 
 
 DMX cables 
 DMX cables come in 5-pin and 3-pin variations. Note that ten of our PAR lights use 5-pin and everything else is 3-pin. 
 Did you know -  DMX cables, used for lighting control, look the same as XLR cables, used for speakers, but they have a different impedance, so don't mix them up. 
 The last "output" in a chain of DMX cables must have a terminator on it. 
 
 
 
 
 Description 
 
 
 Length 
 
 Inventory 2024 
 New for 2025 
 
 
 
 
 3-pin DMX 
 6.5' 
 0 
 13 
 
 
 3-pin DMX 
 10' 
 8 
 
 
 
 3-pin DMX 
 15' 
 3 
 
 
 
 3-pin DMX 
 25' 
 15 
 
 
 
 3-pin DMX Terminator 
 
 0 
 2 
 
 
 5-pin DMX 
 6.5' 
 0 
 7 
 
 
 5-pin DMX 
 15' 
 8 
 
 
 
 5-pin DMX 
 25' 
 9 
 
 
 
 5-pin DMX 
 50' 
 4 
 
 
 
 5-pin DMX Terminator 
 
 0 
 2 
 
 
 3-pin F to 5-pin M adapter 
 
 6 
 
 
 
 3-pin M to 5-pin F adapter 
 
 6