Mohawk / LED roof lighting

One element of the LED lighting will be a large mohawk on the roof. 
 Current plan: 
 
 About 50' of 3/8" OD hard fuel line (aluminum) tubing creates the structure 
 Neon, colorful Cabaret Stretch Mesh from Fabric Wholesale Direct will stretch between the fuel lines to create something colorful and pretty during the day 
 The tubing will be wrapped with seed pixel LED pebbles, at 1.5 cm spacing. This uses a ton of LEDs but looks fantastic.  
 With the pixels wrapped, you get about
 
 1" = 15 pixels 
 1' = 180 pixels 
 3' = 540 pixels 
 
 
 This actually seems to work ok without power injection (needs more testing) so each "spike" can go up about 3' in height 
 I ordered 150 meters = 10,000 pixels = 55 feet worth.
 
 That would come to about 20 strands minimum 
 
 
 
 LED controls: 
 
 Falcon controller like the F16V5 Pixel Controller, setup somehow to handle 32 strands 
 xlights to define the "show". You render a sequence at home and then load it on: 
 Falcon Player lets you use a raspberry pi or something tiny to run the show