DMX Setup 2025

Our primary lighting controller is a ADJ / Wolfmix WMX1.

It can control 1 universe of DMX512 via DMX cables. (You can pay extra to unlock a second universe)

Ask Joel for the password to the online account on Nicolaudie Connect which is a cloud service that lets you sync and save projects. Only 6 projects can be saved on the controller, but you can store more on the cloud. There is a Mac app called WTools that lets you move projects between the cloud and the controller:

Fixture Setup 2024

Par Floods

Fixtures 001-016: ADJ 7P HEX IP PAR Floods set up in seven channel mode. The 7 channels will be Red, Green, Blue, White, Amber, UV, Master Dimmer. The DMX addresses we use should be 1, 8, 15, 22, 29, 36, 43, 50, 57, 64, 71, 78, 85, 92, 99, 106.

These fixtures are well supported by the WMX1.

Instructions for setting up each PAR light

When the PAR flood lights wake up, the LCD screen shows you their settings for the two most important things.

The number of channels should be 7
Each flood light has a DMX address (1, 8, 15, 22, etc)

If the screen is locked, press and hold Mode to unlock it.

If a flood light is not set up correctly, follow these exact instructions to get it set up:

1. Factory Reset

Mode (hold if necessary to unlock)
Press Down until you see Menu Function then Enter
Press Down until DFSET then Enter UP Enter
Mode

2. Disable the screen autolock feature

Mode (hold if necessary to unlock)
Press Down until you see Menu Function then Enter
Press Down until LCD.SET then Enter
Press Enter until Key Lock
Press Down until Off
Press Enter until LCD.SET
Press Mode

3. Set this flood light’s address

First light’s address is 1, then add 7 for each subsequent light, i.e., 1, 8, 15, 22, etc.

Press Mode until Menu Set Addr then Enter
Use Up/Down to set address then Enter

4. Set to 7-channel mode

Press Mode until Menu User Mode then Enter
Press Up to set CH: 07 then Enter
Press Mode

Still flummoxed? Here's the ADJ 7P Hex IP - User Manual.pdf.

Pinspots

Fixtures 017-020: ADJ Saber Spot RGBW LED Pinspot set up in five channel mode. The 5 channels will be Red, Green, Blue, White, Master Dimmer. The DMX addresses we use should be 113, 118, 123, and 128.

These fixtures are well supported by the WMX1.

Instructions for setting up each pin spot

1. Press the either the MENU, UP, or DOWN buttons until “DMX MODE” is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address (113, 118, 123, and 128).
CHANNEL - This will let select your desired DMX
channel mode.
1. Press the either the MENU button until “CHANNEL” is dis-
played, press ENTER. The current DMX channel mode will be
displayed.
2. Press the UP or DOWN buttons to set the DMX
channel mode to 5 and press ENTER to confirm and exit.

Here is the manual: ADJ Saber Spot RGBW Manual.pdf

Moving Heads

Fixtures 021-028: DJXFLI 120W Mini SPOT LED Moving Heads. These have 12 channels each: X, X Fine, Y, Y Fine, Speed from fast to slow, Dimming, Strobe, Color, Gobo, Prism, Reset. The DMX address we use should be 161, 173, 185, 197, 209, 221, 233, 245.

These fixtures require a special fixture on the WMX1 called DJXFLI 120W Moving Head Light. We have downloaded the profile for this fixture to the cloud account so it should show up under Cloud in the WMX1 fixture library. If you don't see it there, you can sync it using the WTOOLS app.

Instructions for setting up each moving head

Sorry buddy you are on your own with this one.

Layout

Par Floods are on the ground around the edge of the pavillion, pointing up at the sails. They are positioned to give even light to illuminate the sails:

Approximate positions of the PAR lamps:

Moving lamps will be clamped to the top, inner guardrail, with four on each shipping container:

Cabling

From	To	Path	Total Length
DJ Booth	MH 1