Lighting Equipment

This is the equipment we have for lighting the dance floor.

It is all DMX controlled.

DMX Controllers

• ADJ DJ WMX1 Controller - a powerful, compact standalone DMX controller that is used to control lights in the dance area
  • Our DMX Setup page has setup details.
  • Manufacturer's home page
  • Visit wolfmix.com/activate for activation and help getting started
• ADJ Airstream Bridge (plus iPad to control it) - An older device that works reasonably well as a simple, backup DMX controller

DMX controlled lights

• 6 (six) ADJ 7P HEX IP with 3pin DMX plugs and Neutrik True1 for power - daisy chainable
• 10 (ten) ADJ 7P HEX IP with 5pin DMX plugs and Neutrik True1 for power- daisy chainable
• 4 (four) ADJ Saber Spot RGBW LED Pinspot  with 3pin DMX plugs and Neutrik PowerCon for power - daisy chainable
• 8 (eight) DJXFLI 120W Moving Head DJ Lights (cheap amazon random stuff) with 3pin DMX and Neutrik PowerCon for power - not daisy chainable

Power cables

Note there are two kinds. Neutrik PowerCon is the old kind("blue and grey"), shown here on the left -- it is not designed to be unplugged under load. Neutrik True1 is the new kind which can be unplugged under load and is therefore safer.

• 16 (sixteen) 6 foot power cords for ADJ 7P HEX IP (NEMA 5-15P to True1)
• 7 (seven) 15' True1 daisy chain cables
• 6 (six) 25' True1 daisy chain cables

DMX cables - 3 pin

• 8 (eight) 10'
• 3 (three) 15'
• 15 (fifteen) 25'

DMX cables - 5 pin

• 8 (eight) 15'
• 9 (nine) 25'
• 4 (four) 50'
  

There are also 3 to 5 pin converters (6 each)