Lighting Equipment

This is the equipment we have for lighting the dance floor.

It is all DMX controlled.

DMX Controllers

• ADJ DJ WMX1 Controller - a powerful, compact standalone DMX controller that is used to control lights in the dance area
  • Our DMX Setup page has setup details.
  • Manufacturer's home page
  • Visit wolfmix.com/activate for activation and help getting started
• ADJ Airstream Bridge (plus iPad to control it) - An older device that works reasonably well as a simple, backup DMX controller

DMX controlled lights

• 6 (six) ADJ 7P HEX IP with 3pin DMX plugs and Neutrik True1 for power - daisy chainable
• 10 (ten) ADJ 7P HEX IP with 5pin DMX plugs and Neutrik True1 for power- daisy chainable
• 4 (four) ADJ Saber Spot RGBW LED Pinspot  with 3pin DMX plugs and Neutrik PowerCon for power - daisy chainable
• 8 (eight) DJXFLI 120W Moving Head DJ Lights (cheap amazon random stuff) with 3pin DMX and Neutrik PowerCon for power - not daisy chainable

Power cables

Note there are two kinds. Neutrik PowerCon is the old kind("blue and grey"), shown here on the left -- it is not designed to be unplugged under load. Neutrik True1 is the new kind which can be unplugged under load and is therefore safer.

Inventory

• 16(sixteen)6foot 7PHEXIP(NEMA

  power Description cords	Length	Inventory 2024	New for ADJ2025
  Nema 5-15P to True1) 7True1 (seven)plugs 15'PAR lights into normal outlet)	6'	16	0
  True1 daisyDaisy chain cables 6Chain (six)plug 25'one PAR light into neighbor)	10'	0	5
  True1 daisyDaisy chainChain cables(plug one PAR light into neighbor)	15'	7	0
  True1 Daisy Chain (plug one PAR light into neighbor)	25'	6	0
  Nema 5-15P to PowerCon (plug spots and moving heads into power)	6' (?)	12 (?)	0
  PowerCon Daisy Chain (plug one spot into neighbor)	6'	0	2

  DMX cables - 3 pin

  • 8 (eight) 10'
  • 3 (three) 15'
  • 15 (fifteen) 25'

  DMX cables come in 5-pin and 3-pin variations. Note that ten of our PAR lights use 5-pin and everything else is 3-pin.

  Did you know - 5DMX cables, used for lighting control, look the same as XLR cables, used for speakers, but they have a different impedance, so don't mix them up.

  The last "output" in a chain of DMX cables must have a terminator on it.

  Description	Length	Inventory 2024	New for 2025
  3-pin DMX	6.5'	0	13
  3-pin DMX	10'	8
  3-pin DMX	15'	3
  3-pin DMX	25'	15
  3-pin DMX Terminator		0	2
  5-pin DMX	6.5'	0	7
  5-pin DMX	15'	8
  5-pin DMX	25'	9
  5-pin DMX	50'	4
  5-pin DMX Terminator		0	2
  3-pin F to 5-pin M adapter		6
  3-pin M to 5-pin F adapter		6

  • 8 (eight) 15'
  • 9 (nine) 25'
  • 4 (four) 50'
    

  There are also 3 to 5 pin converters (6 each)